How to Syncronation Connection EIGRP to Static Routing



In this article I will discuss, how EIGRP can be connected to the static routing. Preparation of the exam networking in my campus. First I make a three-router that is located in one Autonomous systems and give me the name from left to right R1, R2, and R3. At R1 and R2 we configure EIGRP use R3 while we use Static routing, we simply set up one by one



Configuration on PC Client
PC1
PC2
PC3
IP address : 172.16.1.2/24
IP address : 172.16.2.2/24
IP address : 192.168.1.2/24
Netmask : 255.255.255.0
Netmask : 255.255.255.0
Netmask : 255.255.255.0
Gateway : 172.16.1.1
Gateway : 172.16.2.1
Gateway : 192.168.1.1

Configuratin in Router


R1
Router>enable
Router#conf t
Router(config)#hostname R1
R1(config)#int fa0/0
R1(config-if)#ip add 172.16.1.1 255.255.255.0
R1(config-if)#no shutdown
R1(config-if)#exit

R1(config)#int ser2/0
R1(config-if)#ip add 172.16.3.1 255.255.255.252
R1(config-if)#clock rate 64000
R1(config-if)#no shutdown

//Register network on Router
R1(config)#router eigrp 1
R1(config-router)#network 172.16.1.0 0.0.0.255
R1(config-router)#network 172.16.3.0 0.0.0.3

How to calculate the wildcardclick here (Open link in new tab)



R2
Router>enable
Router#conf t
Router(config)#hostname R1
R2(config)#int fa0/0
R2(config-if)#ip add 172.16.2.1 255.255.255.0
R2(config-if)#no shutdown
R2(config-if)#exit

R2(config)#int ser2/0
R2(config-if)#ip add 172.16.3.2 255.255.255.252
R2(config-if)#no shutdown

R2(config)#int ser3/0
R2(config-if)#ip add 192.168.10.9 255.255.255.252
R2(config-if)#clock rate 64000
R2(config-if)#no shutdown

//Register network on Router
R2(config)#router eigrp 1
R2(config-router)#network 172.16.2.0 0.0.0.255
R2(config-router)#network 172.16.3.0 0.0.0.3
R2(config-router)#network 192.168.10.0 0.0.0.3
R2(config-router)#redistribute static //Use the
redistribute static command to include the static
route in the EIGRP updates that are
sent from the R2 router.
R2(config-router)#exit

//Connection to R3
R2(config)ip route 0.0.0.0 0.0.0.0 192.168.10.10
(192.168.10.10 //this next hop in router 3)



R3
Router>enable
Router#conf t
Router(config)#hostname R1
R3(config)#int fa0/0
R3(config-if)#ip add 192.168.1.1 255.255.255.0
R3(config-if)#no shutdown
R3(config-if)#exit

R1(config)#int ser2/0
R1(config-if)#ip add 192.168.10.10 255.255.255.252
R1(config-if)#no shutdown

//Connection to EIGRP
R1(config)#ip route 172.16.2.0 255.255.255.0 192.168.10.9
R1(config)#ip route 172.16.1.0 255.255.255.0 192.168.10.9

If you have been configure this Autonomous system step by step, please explore your skills for more advanced./febtian


About This Blog

Web hosting for webmasters