Dinamic Routing

Dinamic Routing

Interior Vektor
Eksterior Vektor

Distancce Vektor
Link State
Path Vektor
Classfull
RIP
IGRP


EGP
ClassLess
RIPv2
EIGRP
OSPFv2
ISIS
BGPv4
IPV6
RIPng
EIGRP for IPV6
ISPFv3
ISIS for IPV6
BGP for IPV6

Dynamic router is a router that route path established automatically by the router itself according to the configuration are made, if there are changes or additions topology between the network topology, the router will automatically update the new routing, Dynamic routing in umu is divided into 2 the distance vector and link state

Routing Information Protokol (RIP)

Routing protocol is the simplest of the type of distance vector. RIP uses the hop (hop count) as a metric with a maximum of 15 hops, so if the hop count to 16 then the router will give the message "destinatination is unreachable" (goal not met), RIP protocol routing table updated every 30 seconds.
  • invalid timer merupakan waktu dalam detik, router dinyatakan tidak berfungsi
  • holddown timer
  • flush timer

Interior Gateway Routing Protokol(IGRP)

Types include IGRP distance vector is created to deal with problems on the RIP protocol, the maximum number of hops to 255. IGRP is a routing protocol included in the autonomous system (AS), the default administrative distance for IGRP is 100.
Note:
Autonomous system is a set of routers that use the same protocol RIP dimisalkan in a management protocol.

Dinamic Routing

  • Distance vector : how far, the router to find the shortest path to reach the destination network
  • Link State : how fast,who has the ideology that is not necessarily the shortest, this fast in the shortest possible path, there is traffic congestion, and link state to see the amount of available bandwidth, routers usually link state has specifications above average aka expensive.